GMP glass coated stainless steel reactor Model: 30L 50L 100L 200L 300L 500L 1000L 1500L 2000L 3000L 5000L 6300L GMP glass coated stainless steel reactor is a kind of independent management system which pays special attention to product quality and health and safety in the manufacturing process. The production process of GMP glass coated stainless steel reactor is made of carbon steel lined with high temperature anticorrosive glass lining and coated with stainless steel, so as to meet the requirements of GMP workshop, which is mainly used for hygienic aseptic workshop requirements of food and medicine industries. Product Description: 1. The glass lining equipment is fully coated with stainless steel, including the top head and the pipe mouth. The material is 304, and the surface is polished (polished or mirrored). 2. The tank cover of the open reaction tank and the joint of the tank body shall adopt the "7" type outsourcing joint (detachable type); The canister ears are made of stainless steel 304, and the inlet and outlet of the jacket are made of stainless steel 304. 3. During operation, the pressure of the jacket shall not be higher than the maximum pressure of 0.6mpa.Steam heating time to open the valve slowly, to explosion-proof porcelain.When switching between cold water and steam, empty first, and the replacement must be carried out slowly. 4. Generally, electric welding and gas cutting should not be carried out on the kettle body.If it must be carried out, it shall be verified, and the porcelain surface shall be fully inspected upon completion, and sparks shall be prevented from splashing into the kettle by setting fire around the kettle.Reaction Kettle factory website:http://www.tdglasslined.com/reaction-kettle/